Router Show commands

SHOW COMMANDS

Show access-lists – all access lists on the router
Show cdp – cdp timer and holdtime frequency
Show cdp entry * – same as next
Show cdp neighbors detail – details of neighbor with ip add and ios version
Show cdp neighbors – id, local interface, holdtime, capability, platform portid
Show cdp interface – int’s running cdp and their encapsulation
Show cdp traffic – cdp packets sent and received
Show controllers serial 0 – DTE or DCE status
Show dialer – number of times dialer string has been reached, other stats
Show flash – files in flash
Show frame-relay lmi – lmi stats
Show frame-relay map – static and dynamic maps for PVC’s
Show frame-relay pvc – pvc’s and dlci’s
Show history – commands entered
Show hosts – contents of host table
Show int f0/26 – stats of f0/26
Show interface Ethernet 0 – show stats of Ethernet 0
Show ip – ip config of switch
Show ip access-lists – ip access-lists on switch
Show ip interface – ip config of interface
Show ip protocols – routing protocols and timers
Show ip route – Displays IP routing table
Show ipx access-lists – same, only ipx
Show ipx interfaces – RIP and SAP info being sent and received, IPX addresses
Show ipx route – ipx routes in the table
Show ipx servers – SAP table
Show ipx traffic – RIP and SAP info
Show isdn active – number with active status
Show isdn status – shows if SPIDs are valid, if connected
Show mac-address-table – contents of the dynamic table
Show protocols – routed protocols and net_addresses of interfaces
Show running-config – dram config file
Show sessions – connections via telnet to remote device
Show startup-config – nvram config file
Show terminal – shows history size
Show trunk a/b – trunk stat of port 26/27
Show version – ios info, uptime, address of switch
Show vlan – all configured vlan’s
Show vlan-membership – vlan assignments
Show vtp – vtp configs